xfp module,xfp transceiver,bidi sfp,sfp+ module,sfp+ transceiver,sfp+ transceiver supplier

XFP transceiver  must be used in pairs?  XFP transceiver  is not divided into one is a hair is made? Or just as long as the two XFP transceiver can form a pair of use? If the  XFP transceiver  must be used in pairs, then a pair of words is not necessarily the same brand with the model? Or can be casually brand can be used in combination. XFP transceiver  as a photoelectric conversion device is generally used in pairs, but can also be XFP transceiver and fiber switches,  XFP transceiver  and SFP transceiver pair is also used normally, in principle, as long as the optical transmission wavelength is the same, the signal package Format is the same and all support a certain agreement to achieve fiber communication. General dual fiber (normal communication requires two fibers) transceiver is regardless of the transmitter and receiver, only single fiber transceiver (normal communication requires a fiber can be) will have a sub-transmitter and receiver. Whether the dual-fiber transceiver or si

How do I select an XFP transceiver? 1, whether it supports full-duplex and half-duplex? Some chips on the market can only use full-duplex environments, can not support half-duplex, such as access to other brands of switches (SWITCH) or hub (HUB), and it uses half-duplex mode, it will cause serious Conflict and packet loss. 2. Is it connected to other XFP transceivers? Currently on the market more and more XFP transceiver transceiver, such as the compatibility of different brands of transceivers have not done before the test will also have packet loss, transmission time is too long, suddenly high and slow slowly and so on. 3, whether there is a security device to prevent packet loss? Some manufacturers in the manufacture of XFP transceiver, in order to reduce costs, the use of register (Register) data transfer mode, the biggest drawback of this approach is unstable transmission, packet loss, and the best is the use of buffer circuit design, security To avoid data packet loss. 4, tempera

The single-mode bandwidth potential of single-mode  XFP transceiver s makes it the best choice for high-speed and long-range data transmission. Single-mode XFP transceivers are ideal for broadband data networks such as telecommunications, cable, military, financial, customs, customs, civil aviation, marine, power, water and oil fields and require high reliability data transmission or IP data transmission. The field of the web. Is the broadband campus network, broadband cable network and intelligent broadband broadband fiber to the floor, fiber to the home of the most ideal application equipment. To solve the problem of long-distance transmission of data. XFP module , XFP transceiver , bidi sfp , SFP+ module , SFP+ transceiver  Which is good? First choice Fiberland！Thanks for your concern, to learn more about Fiberland, please enter Fiberland website:  http://www.fiberlandtec.com/

The fiber optic network formed by the  XFP transceiver  is suitable for long-distance, high-capacity communications. In the long distance transmission, the need to use the repeater to amplify the long distance transmission and weakened signal, like the relay race, a person tired when the need for a person to continue forward. In the optical fiber network, the fewer the number of relay stations, the lower the cost of the system, the higher the reliability. The maximum distance of the  XFP transceiver  is the longest distance that can be transmitted without a repeater between the optical transmitter and the optical receiver, When designing an optical fiber communication system, it is important to calculate the maximum relay distance. The maximum relay distance of the fiber optic transmission system is determined by four factors. 1. The transmitter outputs the average optical power of the fiber into the fiber. The greater the power coupled to the fiber, the longer the relay distance. 2. F

What is an XFP transceiver? XFP transceiver  (photoelectric converter) is only used for photoelectric signal conversion, and protocol converter used to convert a protocol to another  XFP transceiver  is a physical layer device, is the fiber optic broadband into twisted pair device , There are 10/100 / 1000M conversion. Protocol converter there are many, most of which is basically a two-tier equipment, often encountered a RAD protocol converter is 2M E1 line into V.35 data lines connected to the router equipment, of course, 2M turn Twisted pair Ethernet, with 2M communication lines can be achieved within the scope of remote access and expansion. These two kinds of equipment on its maintenance is not much, as long as not burned generally not bad. What is the Optical transceiver? Optical transmitters and off receivers, optical transmitters are receiving electrical signals that are converted into optical signals transmitted in fiber access, while optical receivers. Network video server is

First, the product awareness: The company has the following categories of products (I) XFP transceiver 1. Bandwidth: 10 / 100M 10/100 / 1000M 2. Fiber type: single mode and multi-mode 3. Fiber port: single fiber and double fiber 4. Wavelength: 850, 1310, 1550 nm (conventional) 5. Distance: 2,5,20,40,60,80,100,120km 6. Interface: SC, ST, FC, LC 7. Structure: external, built-in, card built-in Category:  XFP Transceiver  Rack: 2U14 slot, 2U16 slot, card type XFP transceiver, built-in XFP transceiver, external  XFP transceiver Function: is a short distance from the electrical signal and long distance optical signal interchangeable Ethernet transmission media conversion unit. Note: The name of the XFP transceiver has the following names: photoelectric converter, media converter, media converter Adaptive is the process of processing and analysis, according to the data characteristics of the data processing automatically adjust the processing method, processing order, processing parameters, b